Crankshaft Position (CKP) Sensor
WARNING: This page is about a different car, the 1995 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect CKP sensor connector (located on left side of cylinder block). Measure resistance between specified terminals of CKP sensor connector. See Fig 1 . See CKP SENSOR RESISTANCE table. If resistance is not as specified, replace CKP sensor. If resistance is as specified, check wiring between CKP sensor and PCM. If wiring is okay, replace PCM.
CKP SENSOR RESISTANCE
| Terminals No. | Ohms |
|---|---|
| 1 & 2 | 1000 |
| 1 & 3 | 0 |
| 2 & 3 | 0 |