LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1995 >> 90 Base, 2.8 A, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - System/Component Tests) >> Fuel System >> Fuel Delivery >> Fuel Pump Relay Without Scan Tester

Fuel Pump Relay Without Scan Tester

WARNING: This page is about a different car, the 1995 Audi Cabriolet. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel pump relay. Refer to the ELECTRICAL COMPONENT LOCATIONS  . Without voltage applied to relay, there should be no continuity between terminals No. 48 and 52, and between terminals No. 48 and 59. See Figure . With battery voltage applied across terminals No . 28 and 29, there should be continuity between terminals No. 48 and 52, and between terminals No. 48 and 59. If continuity is not as specified, replace relay.