Replacing Oxygen Sensor Control Unit - Information (GROUP 25, NO. 85-03)
Publication date: 1985-07-05Reference number: GROUP 25, NO. 85-03
Supersedes refnos: GROUP 25, NO. 84-01, GROUP 25, NO. 84-02
REPLACING OXYGEN SENSOR CONTROL UNIT - INFORMATION
TECHNICAL SERVICE BULLETIN
Reference Number(s): GROUP 25, NO. 84-01, GROUP 25, NO. 84-02, GROUP 25, NO. 85-03
ELECTRONIC CONTROL UNIT FOR OXYGEN SENSOR: WIRING VARIATIONS - CONTROL UNIT - MULTI-PLUG
Model(s): 1980-84 Audi 5000, 4000, Coupe
Group: 25
Bulletin No.: 85-03
Date: July 5, 1985.
NOTE:
This bulletin supersedes the following Product Circulars:
Group 25, No. 84-01, dated January 18, 1984.
Group 25, No. 84-02, dated February 10, 1984.
SERVICE INFORMATION
When replacing Oxygen Sensor control unit, check part number of new unit against original unit.
If control unit with a different part number is to be installed, wiring of multi-plug harness must correspond to new control unit.
See control unit variation list below for required connector wiring.