Removal And Installation
REMOVAL
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the rear belly pan. Refer to BELLY PAN, REAR, REMOVAL AND INSTALLATION
.
- Position a suitable hydraulic lift underneath the fuel tank.
- Release the retaining buttons (1a) from their housing, undo the fixing screws (1b) and remove the retaining band (1c) for the fuel reservoir.
INSTALLATION
- Refit the retaining band in its housing and tighten the fixing screws.
Component Fixing Ø Value (daNm) Fuel reservoir retaining band Screw M8x30 3.2 ÷ 3.9 - Fit the retaining buttons of the band in position.
- Install the rear belly pan. Refer to BELLY PAN, REAR, REMOVAL AND INSTALLATION .
- Remove the vehicle from the hoist.