Front Fuel Delivery Line
REMOVAL
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the engine bellypan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION
.
- Undo the fixing screws (1a) and remove the panel-oddments pocket (1b).
- Adjust the quick coupling and disconnect the front fuel supply pipe, submerged pump side.
- Release the front fuel supply pipe from the retaining clips.
- Adjust the quick coupling and separate the front/rear sections of the front fuel supply pipe.
- Remove the front fuel supply pipe from its housing.
INSTALLATION
- Check that the pipe is not damaged. Otherwise, replace it with a new one supplied by the Spare Parts Dept.
- Reposition the front fuel supply pipe in its housing.
- Engage the front fuel supply pipe with the retaining clips.
- Adjust the quick coupling and connect the front fuel supply pipe to the submerged pump.
- Extrude a strip of sealant along the perimeter of the panel-oddments pocket, in the area shown in the illustration.
- Reposition the panel-oddments pocket in its housing and tighten the fixing screws.
- Install the engine bellypan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION .
- Remove the vehicle from the hoist.