Confirmation Procedure
1. Start the engine.
2. Hold the engine speed at 3, 00 rpm without load (in P or N) until the radiator fan comes on, then let it idle.Test-drive the vehicle under these conditions:
- HDS [ECT Sensor 1] above 158 deg.F (70 deg.C)
- Transmission in D
- Drive at a steady speed between 55 - 75 mph (90 - 120 km/h) for 1 minute, then decelerate (with throttle fully closed) for 10 seconds or more
4. Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P0139.