Confirmation Procedure
1. Start the engine.
2. Hold the engine speed at 3, 000 rpm without load (CVT in P or N, M/T in neutral) until the radiator fan comes on, then let it idle.Test-drive the vehicle under these conditions:
- HDS [ECT Sensor 1] above 158 deg.F (70 deg.C)
- CVT in D, M/T in 4th or 5th
- Vehicle speed between 25 - 55 mph (40 - 90 km/h) for 5 minutes
- Drive at a steady speed between 55 - 75 mph (90 - 120 km/h) for 10 seconds, then decelerate (with throttle fully closed) for 5 seconds or more
4. Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P2A00.