Confirmation Procedure
1. Start the engine.
2. Hold the engine speed at 3, 000 rpm without load (CVT in P or N, M/T in neutral) until the radiator fan comes on, then let it idle for 2 minutes.Test-drive the vehicle under these conditions:
- HDS [ECT Sensor 1] above 158 deg.F (70 deg.C)
- CVT in D, M/T in 4th
- HDS [Engine Speed] between 1, 500 - 3, 000 rpm
- Drive 30 seconds or more
4. Monitor the HDS [OBD STATUS (PGM-FI)] for DTC P2270.