Inspection Outline
- The components to be tested are indicated by a dotted line.
NOTICE:
For more efficient troubleshooting, you may be able to eliminate some inspection items as potential failures based on the conditions of the failure and vehicle.
- Confirm the input signals of the transmission range switch with the HDS while doing the confirmation procedure.
-
- -
There is a signal that shows ON that should not be ON in certain position(s)/mode(s):
- -
There is a signal that turns ON in all positions/modes:
- -
| Inspection Items | Work Items | |||
|---|---|---|---|---|
| a | Transmission Range Switch | Do the Transmission Range Switch Test . | o | o |
| b | Shift Position Indicator | Shift Position Indicator Inspection | o | o |
| Inspection Items | Work Items | |||
|---|---|---|---|---|
| c | External Circuit | ATP-P, ATP-R, ATP-N, ATP-D, ATP-S, ATP-FWD, ATP-RVS Shorted Wire Inspection (Shorted Wire to Wire) | o | |
| ATP-P, ATP-R, ATP-N, ATP-D, ATP-S, ATP-FWD, ATP-RVS Shorted Wire Inspection (Shorted to Ground) | o | |||
| d | TCM | TCM Inspection | o | |