IGPS (PCS) Circuit Inspection
Test Procedure
- Preparation
-
- -
EVAP canister purge valve connector (2P): disconnected
- -
- Procedure
-
- -
Perform the inspection according to the following table.
- -
(Disconnected) EVAP canister purge valve connector (2P) female terminals
IG Mode
Normal Conditions
IGPS (PCS) circuit inspection
ON
12 V battery voltage [circuit type 3]
Results
- If abnormal, there is a problem in the circuit.
If the power supply inspection of the above table showed abnormally, do the additional Power Supply Inspection , to locate the failure.