Camshaft Removal And Installation: Removal
Front
- Battery - Remove
- EGR Valve - Remove
- EGR Valve Stud Bolt - Remove
Remove the EGR valve stud bolts (A).
- Timing Belt - Remove
- Front Camshaft Pulley and Back Cover - Remove
1. Remove the front camshaft pulley (A) and the back cover (B). 2. Disconnect the CMP sensor connector (C).
- Front Rocker Arm Assembly - Remove
- Front Camshaft - Remove
1. Remove the thrust cover (A). 2. Remove the front camshaft (B).
3. Remove the camshaft oil seal (C).
Rear
- Fuel Pressure - Relieve
- Engine Coolant - Drain
- Air Cleaner - Remove
- Intake Air Duct - Remove
1. Disconnect the breather pipe (A). 2. Remove the intake air duct (B).
- Fuel Feed Hose - Disconnect
Remove the quick-connect fitting cover (A), then disconnect the fuel feed hose (B) .
- Cylinder Head Peripheral - Remove
1. Disconnect the EVAP purge hose (A). 2. Move the EVAP purge joint (B) from the bracket (C).
3. Remove the EVAP canister joint bracket. 4. Disconnect the heater hoses (A). 5. Remove the harness bracket (A) from the rear cylinder head. - Timing Belt - Remove
- Rear Camshaft Pulley and Back Cover - Remove
Remove the rear camshaft pulley (A) and the back cover (B).
- Rear Rocker Arm Assembly - Remove
- High Pressure Fuel Pump - Remove
- Rear Camshaft - Remove
1. Remove the high pressure fuel pump housing (A). 2. Remove the rear camshaft (B).
3. Remove the camshaft oil seal (C).