Thermostat Replacement
- Remove the engine compartment covers (see
ENGINE COMPARTMENT COVER REPLACEMENT
).
- Drain the engine coolant (see COOLANT CHECK
).
- Do the battery removal procedure (see
BATTERY REMOVAL AND INSTALLATION
).
- A/T model: Remove harness clamps (A) and disconnect the positive starter cable (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- A/T model: Remove the bolt (A) and the harness holder (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the thermostat cover (A), then remove the thermostat (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the new thermostat with a new rubber seal (C) in the reverse order of the removal.
- Do the battery installation procedure (see
BATTERY REMOVAL AND INSTALLATION
).
- Refill the radiator with engine coolant, and bleed the air from the cooling system (see COOLANT CHECK
).
- Clean up any spilled engine coolant.
- Install the engine compartment covers (see
ENGINE COMPARTMENT COVER REPLACEMENT
).