ECM/PCM Reset
WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
- Reset the ECM/PCM with the HDS while the engine is stopped.
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and wait 30 seconds.
- Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, and disconnect the HDS from the DLC.
- Do the ECM/PCM idle learn procedure (see PCM IDLE LEARN PROCEDURE ).