LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Type S, Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Clutch Replacement >> Flywheel and Pilot Bearing Replacement

Flywheel and Pilot Bearing Replacement

  1. Install the special tool.
    Fig 1: Installing The Special Tool
    G01170521Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the flywheel mounting bolts in a crisscross pattern in several steps, then remove the flywheel.
  3. Remove the pilot bearing (A) from the flywheel (B).
    Fig 2: Removing The Pilot Bearing
    G01170522Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the new pilot bearing (A) into the flywheel using the special tools. Apply a light coat of oil to the bearing surface.
    Fig 3: Installing The New Pilot Bearing
    G01170523Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the flywheel by aligning the crankshaft dowel pin with the hole in flywheel, and install the mounting bolts finger-tight.
  6. Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps.
    Fig 4: Installing The Special Tool, & Torqueing The Flywheel Mounting Bolts
    G01170524Courtesy of AMERICAN HONDA MOTOR CO., INC.