LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.2CL Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Vehicle Stability Assistance System) >> Removal & Installation >> PULSERS/Wheel Sensors >> Inspection

PULSERS/Wheel Sensors: Inspection

WARNING: This page is about a different variant/trim than selected.

Check the front and rear pulser for chipped or damaged teeth. Measure the air gap between the wheel sensor and the pulser all the way around while rotating the pulser. If the gap exceeds the standard, check for a bent suspension arm. See Figure .