Audio Driving Instructions Cannot Be Heard ('03 Model)
- Push the display unit MENU key, and select "setup".
- Check the audio driving instructions volume setting.
Is it set to OFF?
- YES -Set the volume to an audible level.
- NO -Go to step 3.
- Turn the ignition switch OFF.
- Disconnect the navigation unit connector B (16P), audio unit 20P connector, and onstar system interface unit connector A (12P).
- Check for continuity between body ground and navigation unit connector B (16P) terminals No. 3, No. 9, and No. 10 individually.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES
-If terminal No. 3 has continuity to ground, repair the short to body ground in the WHT/BLK wire.
If terminal No. 9 or No. 10 have continuity to ground, replace the affected shielded harness.
- NO -Go to step 6.
- YES
-If terminal No. 3 has continuity to ground, repair the short to body ground in the WHT/BLK wire.
- Check for continuity between navigation unit connector B (16P) terminal No. 9 and the onstar system interface unit connector A (12P) terminal No. 6.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 7.
- NO -There is an open in the circuit between the navigation unit and the onstar system interface unit. Replace the affected shielded harness.
- Check for continuity between navigation unit connector B (16P) terminal No. 10 and the onstar system interface unit connector A (12P) terminal No. 5.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 8.
- NO -There is an open in the circuit between the navigation unit and onstar system interface unit. Replace the affected shielded harness.
- Check for continuity between navigation unit connector B (16P) terminal No. 3 and the audio unit 20P connector terminal No. 14.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 9.
- NO -Repair open in the wire between the navigation unit and the audio unit.
- Disconnect the navigation unit connector A (12P) and amplifier unit 26P connector.
- Check for continuity between navigation unit connector A (12P) terminal No. 8 and body ground.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Repair short to body ground in the wire between the navigation unit, the audio unit, and the amplifier unit.
- NO -Go to step 11.
- Check for continuity between navigation unit connector A (12P) terminal No. 8 and the audio unit 20P connector terminal No. 1.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 12.
- NO -Repair open in the wire between the navigation unit and the audio unit.
- Check for continuity between navigation unit connector A (12P) terminal No. 8 and amplifier unit 26P connector terminal No. 5.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES -Go to step 13.
- NO -Repair open in the wire between the navigation unit and the amplifier unit.
- Substitute a known-good audio unit, and recheck.
Is the system OK?
- YES -Replace the audio unit (see STEREO SOUND SYSTEM ).
- NO -Go to step 14.
- Substitute a known-good amplifier unit, and recheck.
Is the system OK?
- YES -Replace the amplifier unit. See STEREO SOUND SYSTEM .
- NO -Replace the navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION ).