LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Performance System Self-Diagnostics) >> Diagnostic Tests >> Fuel Tank Vapor Control Valve Test >> Float Test

Float Test

WARNING: This page is about a different car, the 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Ensure fuel tank is less than half full. Remove fuel filler cap to relieve fuel tank pressure, then reinstall cap. Disconnect fuel tank vapor recirculation tube. See Fig 1 . Connect a vacuum pump to vapor recirculation hose coming from fuel tank. Plug tube. Apply vacuum to fuel tank vapor recirculation hose. If vacuum holds, replace fuel tank vapor control valve. See EMISSION SYSTEMS & SUB-SYSTEMS in REMOVAL & INSTALLATION article. If vacuum does not hold, float is okay. Perform valve test. See VALVE TEST  .

Fig 1: Identifying Fuel Tank Vapor Recirculation Hose
G00110192Courtesy of AMERICAN HONDA MOTOR CO., INC.