One Or Both Mirrors Inoperative
- Turn ignition switch to ON position. Using DVOM, check voltage between 10-pin connector terminal No. 1 (Yellow/Black wire) and ground. See Figure. If battery voltage exists, go to next step. If battery voltage does not exist, check for blown fuse No. 4 (7.5-amp), located in driver's underdash fuse/relay box. If fuse is okay, check for open in Yellow/Black wire between driver's underdash fuse/relay box and power mirror switch.
- Turn ignition off. Using an ohmmeter, check continuity between 10-pin connector terminal No. 2 (Black wire) and ground. Continuity should exist. If no continuity exists, check for open in Black wire power mirror switch and ground.