Erasing Diagnostic Trouble Codes
NOTE:
Before disconnecting battery, get radio theft protection code from vehicle owner. When battery power is restored, turn radio on and enter 5 digit theft protection code when CODE appears in radio display.
To erase trouble code memory from DPMS remove fuse No. 15 from underhood fuse/relay panel for 30 seconds.
NOTE:
See the TROUBLE SHOOTING FLOW CHART DIRECTORY
for location of individual Flow Charts.
DIAGNOSTIC TROUBLE CODE DEFINITIONS
| Code | Cause | Flow Chart No. |
| 1 | Slide Switch/Wiring | 21 |
| 2 | Recline Switch/Wiring | 22 |
| 3 | Front Up-Down Switch/Wiring | 23 |
| 4 | Rear Up-Down Switch/Wiring | 24 |
| 5 | Tilt Switch/Wiring | 25 |
| 6 | Extend-Retract Switch/Wiring | 26 |
| 11 | Slide Switch/Relay Wiring | 3,4,6,21 |
| 12 | Recline Switch/Relay Wiring | 3,4,6,22 |
| 13 | Front Up-Down Switch/Relay Wiring | 3,4,6,23 |
| 14 | Rear Up-Down Switch/Relay Wiring | 3,4,6,24 |
| 15 | Tilt Switch/Relay Wiring | 3,4,6,25 |
| 16 | Extend-Retract Switch/Relay Wiring | 3,4,6,26 |
| 21 | MEMO Button Wiring | 33 |
| 22 | Position Button 1 Wiring | 34 |
| 23 | Position Button 2 Wiring | 35 |
| 24 | Forward Slide Switch Wiring | 21 |
| 25 | Backward Slide Switch Wiring | 21 |
| 26 | Forward Recline Switch Wiring | 22 |
| 27 | Backward Recline Switch Wiring | 22 |
| 28 | Front Up-Switch Wiring | 23 |
| 29 | Front Down-Switch Wiring | 23 |
| 30 | Rear Up-Switch Switch Wiring | 24 |
| 31 | Rear Down-Switch/Wiring | 24 |
| 32 | Tilt Up-Switch Wiring | 25 |
| 33 | Tilt Down-Switch Wiring | 25 |
| 34 | Extend Switch Wiring | 26 |
| 35 | Retract Switch Wiring | 26 |
| 36 | Ignition Switch/Wiring | 1 |