LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1995 >> Legend GS, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Component Tests >> PULSER Test (Driver's Window Motor)

PULSER Test (Driver's Window Motor)

NOTE: Pulser is integral part of driver's window motor assembly. If pulser is defective, replace motor assembly.

Connect test leads of analog ohmmeter to driver's power window motor 4-pin connector terminal No. 1 (Red/Yellow wire) and terminal No. 2 (Red/Blue wire). Using jumper wires, connect battery voltage to 4-pin connector terminal No. 3 (Blue wire) and ground terminal No. 4 (Black wire). See Figure . If ohmmeter needle does not swing back and forth while motor operates, replace motor.