LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Clutches) >> Bleeding Clutch Hydraulic System

Bleeding Clutch Hydraulic System

WARNING: This page is about a different car, the 1994 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.

Attach hose to bleeder fitting, located on clutch release cylinder, next to hydraulic line. Submerge other end of hose in container half full of clean brake fluid. Fill reservoir with DOT 3 or DOT 4 brake fluid. Open bleeder fitting. Have assistant press clutch pedal to full release position. Close bleeder fitting. Repeat until air bubbles no longer emerge from hose. Refill reservoir.