LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1988 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Set/Resume Switch >> Integra

Set/Resume Switch: Integra

  1. Remove steering wheel. Check for continuity between Light Green/Black and Blue/Red terminals with set switch depressed. There should be continuity. Check for continuity between the Blue/Red and Light Green/Red terminals with resume switch depressed. There should be continuity. Remove steering column lower cover. See Fig 1 .
  2. On Integra, disconnect 3-pin slip ring connector and Blue/Red wire. There should be continuity between Blue/Red wire and terminal A, Light Green/Red wire and terminal B, and Light Green/Black wire and terminal C, as you turn slip ring. See Fig 2 .
Fig 1: Testing Set/Resume Switch
G102828Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Testing Set/Resume Switch Slip Ring
G102829Courtesy of AMERICAN HONDA MOTOR CO., INC.