LEMON Manuals: Even more car manuals for everyone

Body Sill Reinforcement

Welding body components; see WELDING, GENERAL .

Remove. See SIDE SECTION, EXPOSING

Determine the extent of the damage. See BODY SIDE .

Fig 1: Sill Molding Cut Lines
GLL158509Courtesy of VOLVO CARS CORPORATION

Alternative sill molding cutting points.

Fig 2: Sill Molding Reinforcement Cut Lines
GLL158510Courtesy of VOLVO CARS CORPORATION

Upon replacement of the sill molding reinforcement assembly, the rear fender, B-pillar and A-pillar must be replaced.

Remove the following items: 

Alternative cutting points.

Fig 3: Sill Molding Reinforcement Weld Locations
GLL158511Courtesy of VOLVO CARS CORPORATION
Fig 4: Outer Body Sill Panel Weld Locations
GLL158512Courtesy of VOLVO CARS CORPORATION

Install the following items: 

Seal; see BODY SEAL, SEALING DIAGRAM .

Rustproof; see RUSTPROOFING .

Install the side section. See SIDE SECTION, EXPOSING .