Front Sub Frame Level Sensor Removal And Installation/Replacement
Mobile Repair Possible: No
Removal Procedure:
- Remove front left wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION
- Unlock and disconnect electrical connector (1).
- Remove nut (1).
Torque: 8 Nm
- Unthread level sensor rod (2).
- Remove 2 screws (1).
Torque: 5 Nm
- Remove level sensor (2).
Installation Procedure:
- Installation is the reverse of removal procedure, noting the following.
All fasteners must be tightened to torque specification!
- Install front left wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION
- Check headlamp aiming. Refer to HEADLAMP AIMING