LEMON Manuals: Even more car manuals for everyone

Inspection [12/2023 - ]: Procedure

  1. INSPECT NO. 2 AIR FUEL RATIO SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1183455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Air Fuel Ratio Sensor)

      Standard Resistance

      Tester Connection Condition Specified Condition Result
      D25-1 (HA1B) - D25-2 (+B) 20°C (68°F) 2 to 6 Ω Ω
      D25-1 (HA1B) - D25-4 (A1B-) Always 10 kΩ or higher kΩ

      If the result is not as specified, replace the air fuel ratio sensor.