LEMON Manuals: Even more car manuals for everyone

Installation [03/2024 - ]: Procedure

  1. INSPECT SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 1
  2. INSTALL STEERING SENSOR 
    1. GTY1193785Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Guide *b Pin
      *c Lock Pin - -
      1. Align the 2 pins and 2 guides, and engage the 6 claws to install the steering sensor to the spiral cable sub-assembly.
        NOTE:
        • Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly.
        • Do not damage the claws or pins of the spiral cable sub-assembly or guides of the steering sensor.
        • The spiral cable sub-assembly can be rotated up to 30° even when the interlock is engaged. Therefore, make sure that both guides are aligned properly when installing the steering sensor to the spiral cable sub-assembly.
      2. Remove the lock pin from the steering sensor.
  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 

    Refer to PROCEDURE - Step 2

  4. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 3
  5. INSTALL UPPER STEERING COLUMN COVER 
  6. INSTALL LOWER STEERING COLUMN COVER 
  7. ADJUST SPIRAL CABLE SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 6
  8. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to PROCEDURE - Step 5

  9. CHECK STEERING WHEEL CENTER POINT 

    Refer to PROCEDURE - Step 7

  10. INSTALL HORN BUTTON ASSEMBLY 
    Refer to PROCEDURE - Step 1
  11. INSTALL NO. 2 STEERING WHEEL COVER 
  12. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 

    for Gasoline Model: Refer to INSTALLATION [12/2023 - ]

    for 1Motor-HEV Model: Refer to INSTALLATION [03/2024 - ]

  13. UPDATE ECU SECURITY KEY 

    Refer to UPDATE ECU SECURITY KEY [12/2023 - ]

  14. INSPECT HORN BUTTON ASSEMBLY 

    Refer to PROCEDURE - Step 4

  15. PERFORM DIAGNOSTIC SYSTEM CHECK 
  16. CHECK SRS WARNING LIGHT 

    Refer to OPERATION CHECK [03/2024 - ]

  17. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL 

    HINT: 

    When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

    Refer to AUTOMATIC LEARNING CHART [12/2023 - ]