LEMON Manuals: Even more car manuals for everyone

Inspection [08/2015 - ]: Procedure

  1. INSPECT SKID CONTROL BUZZER ASSEMBLY 
    1. Apply battery voltage to the skid control buzzer, and check that the buzzer sounds.
      GTY291586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Measurement Condition Specified Condition
      Battery positive (+) voltage → Terminal 2 Skid control buzzer sounds
      Battery negative (-) voltage → Terminal 1

      If the result is not as specified, replace the skid control buzzer assembly.