LEMON Manuals: Even more car manuals for everyone

Neutral Position Switch: Inspection: Procedure

  1. INSPECT NEUTRAL SWITCH 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL

    2. Remove the neutral switch.

      See step  1

    3. Inspect for continuity between neutral switch terminal A and D.

      If not as specified, replace the neutral switch.

      Refer to REMOVAL 

      Refer to INSTALLATION 

      Specification

      Measured condition Continuity
      Rod pushed Continuity detected
      Rod not pushed No continuity
      GTY491379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Neutral Switch
      *b Rod
      *c Push