DTC U3000-66: Control Module Signal Has Too Many Transitions / Events [07/2015 - ]: Contents
WARNING: This page is about a different car, the 2016 Scion iA. However, it is still accessible from the selected car via links, so may be relevant.
| DTC No. |
Detection Item |
DTC Detection Condition |
Warning Indicate |
Memory |
Fail-safe Operation |
Note |
| U0100/5C-61 |
Lost Communication with ECM / PCM "A" |
Pre-collision system |
- Pre-collision warning light (amber): Illuminate
|
DTC Stored |
Applicable
- Pre-collision control: Control disabled
|
- Drive cycle: Not applicable
- Self test type: CMDTC self test
|
| DTC |
U300066 |
SCBS system |
| DETECTION CONDITION |
- Laser sensor detects a large number of consecutive drive cycles with the pre-collision system malfunction
|
| FAIL-SAFE |
- Pre-collision warning light (amber) Illuminates
- Pre-collision control disabled
|
| TROUBLE AREA |
- ECM malfunction
- Combination meter malfunction
- Laser sensor malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |