LEMON Manuals: Even more car manuals for everyone

Fuel Pump: Removal: Procedure

  1. FUEL PUMP CAP REMOVAL NOTE 
    NOTE:

    The fuel pump cap could be damaged if the SST (wrench) is used with any gap between the cap and the SST (wrench). Securely attach the SST (wrench) so that there is no gap between the SST (wrench) tabs and the side of the cap.

    1. Remove the fuel pump cap using the SST (wrench).
      GTY491800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 49F042001 
  2. REMOVE FUEL PUMP 
    1. Complete the "BEFORE SERVICE PRECAUTION".

      Refer to PRECAUTION

    2. If the fuel gauge level indicates 3/4 or more, refer to the "FUEL DRAINING PROCEDURE" and drain the fuel.

      Refer to PROCEDURE - Step 3

    3. Disconnect the negative battery cable.

      Refer to REMOVAL

    4. Remove the rear seat cushion.

      Refer to REMOVAL

    5. Remove the service hole cover.
      GTY483269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Service Hole Cover
    6. Remove the fuel pump unit connector.
      GTY487271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Fuel Pump Unit Connector
      *2 Fuel Tube Connector (Quick Type)
      *3 Fuel Pump Cap
      *4 Fuel Pump Unit
      *5 Packing
      *a Vehicle Front
      N*m (kgf*cm, ft.*lbf): Specified torque
      • Non-reusable part
    7. Remove the fuel tube connector (quick type).

      Refer to REMOVAL 

    8. Remove the fuel pump cap.

      See step  1

    9. Remove the fuel pump unit.
    10. Remove the packing.