Fuel Pump Ecu: Inspection: Procedure
- INSPECT FUEL PUMP ECU
- Perform the On-Demand Self-Test.
- Verify that a fuel pump ECU related DTC is detected.
Refer to ON-BOARD DIAGNOSTIC TEST
- If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting.
Refer to DIAGNOSTIC TROUBLE CODE CHART
- If a DTC is not detected, go to the next step.
- If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting.
- Inspect the following:
- Fuel pump ECU damage
- Fuel pump ECU connector damage or corrosion
If there is any malfunction, repair or replace the malfunctioning part.