LEMON Manuals: Even more car manuals for everyone

Battery / Charging System (Service Information): Generator: Removal: Procedure

  1. GENERATOR REMOVAL NOTE 
    1. Disconnect the A/C compressor connector and set the wiring harness aside.
    2. Remove the generator from the upper side of the engine compartment.
      GTY482992Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Intake Manifold
      *b Vehicle Front
      *c Generator
  2. REMOVE GENERATOR 
    1. Disconnect the negative battery cable.

      Refer to REMOVAL 

    2. Remove the plug hole plate.

      Refer to REMOVAL

    3. Remove the generator drive belt.

      Refer to REMOVAL

    4. Remove the drive belt auto tensioner.

      Refer to REMOVAL

      GTY487022Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Drive Belt Auto Tensioner *2 Terminal B Cable
      *3 Generator Connector *4 Generator
      N*m (kgf*cm, ft.*lbf): Specified torque - -
    5. Remove the terminal b cable.
    6. Remove the generator connector.
    7. Remove the generator.

      See step  1