LEMON Manuals: Even more car manuals for everyone

Battery / Charging System (Service Information): Generator: Installation: Procedure

  1. GENERATOR INSTALLATION NOTE 
    GTY490698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Spacer
    *b Nut
    1. To facilitate the installation of the generator to the engine, grasp the spacer in the bolt installation hole using pliers and push it down to the nut side.
    2. Temporarily install the generator to the engine with the bolt C.
      GTY491194Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      N*m (kgf*cm, ft.*lbf): Specified torque
    3. Align the generator fixing hole with the engine side hole, then temporarily tighten the generator installation bolt B.
    4. Securely tighten the generator installation bolts in the order of B, C.

      Torque: 45 N*m (459 kgf*cm, 33 ft.*lbf) 

  2. INSTALL GENERATOR 
    1. Install the generator.

      Torque: 45 N*m (459 kgf*cm, 33 ft.*lbf) 

      See step  1

      GTY487022Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Drive Belt Auto Tensioner *2 Terminal B Cable
      *3 Generator Connector *4 Generator
      N*m (kgf*cm, ft.*lbf): Specified torque - -
    2. Install the generator connector.
    3. Install the terminal b cable.

      Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf) 

    4. Install the drive belt auto tensioner.

      Torque: 26 N*m (265 kgf*cm, 19 ft.*lbf) 

      Refer to INSTALLATION

    5. Install the generator drive belt.

      Refer to INSTALLATION

    6. Install the plug hole plate.

      Refer to INSTALLATION

    7. Connect the negative battery cable.

      Refer to INSTALLATION