LEMON Manuals: Even more car manuals for everyone

Power Management Control Ecu: Installation: Procedure

  1. INSTALL POWER MANAGEMENT CONTROL ECU 
    1. Install the vehicle wiring harness clip.
    2. Attach the hook.
    3. Attach the tabs.
    4. Connect the connectors.
    5. Install the following parts:
      1. Front side trim (LH).

        Refer to PROCEDURE - Step 1

      2. Front scuff plate (LH).

        Refer to PROCEDURE - Step 1

    6. Connect the negative battery cable.

      Refer to PROCEDURE - Step 1