LEMON Manuals: Even more car manuals for everyone

Rear Power Window Switch: Removal: Procedure

  1. REMOVE REAR POWER WINDOW SWITCH 
    1. Disconnect the negative battery cable.

      Refer to PROCEDURE - Step 1

    2. To prevent scratches or damage, affix protective tape to the position shown in the figure of the rear door trim.
      GTY484263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Rear Door Trim
      *b Protective Tape
      *c Power Window Subswitch
    3. Insert a remover tool shown in the figure and remove the tab A in the direction of arrow (1).
      GTY491601Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Remover Tool *b Power Window Subswitch Cover
      *c Rear Door Trim *d Tab A
      *e Tab B *f Tab C
    4. Insert a remover tool shown in the figure and remove the tabs B in the direction of arrow (1).
    5. Slide the power window main switch in the direction of the arrow (2) shown in the figure and remove the tab C.
    6. Disconnect the connector.
      GTY494719Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Connector
    7. Pull the power window subswitch cover end in the order of (1), (2), (3), and (4) shown in the figure and detach the tabs from the power window subswitch cover.
      GTY486401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Power Window Subswitch Cover *b Tab
      *c Power Window Subswitch *d Edge of Power Window Subswitch Cover
    8. Remove the power window subswitch in the direction of the arrow (5) shown in the figure.