LEMON Manuals: Even more car manuals for everyone

Camshaft Oil Control Valve: Inspection: Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Measuring Resistance Of Oil Control Valve
      GTY163807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Specified Condition
      1 (+B) - 2 (GND) 6.9 to 7.9 Ω at 20°C (68°F)

      If the result is not as specified, replace the oil control valve assembly.

    2. Check the operation.
      Fig 2: Connecting Battery Positive (+) Lead To Terminal 1 And Negative (-) Lead To Terminal 2
      GTY251061Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Spool Valve
      *2 Battery
      1. Connect a battery positive (+) lead to terminal 1 and negative (-) lead to terminal 2, and check the movement of the spool valve.

        OK

        Condition Specified Condition
        Battery positive (+) voltage is applied Valve moves in black arrow direction shown in illustration
        Battery positive (+) voltage is cut off Valve moves in white arrow direction shown in illustration

        If the result is not as specified, replace the oil control valve.

        NOTE:

        Accumulation of foreign matter can cause minor pressure leaks. Minor pressure leaks in the intake side oil control valve will cause the intake camshaft to advance. Minor pressure leaks in the exhaust side oil control valve will cause the exhaust camshaft to retard. The inappropriate camshaft timing that results from these leaks will cause a DTC to be set.