LEMON Manuals: Even more car manuals for everyone

On-Vehicle Inspection

  1. REMOVE STOP LIGHT CONTROL (BRK) RELAY 
    1. Remove the stop light control (BRK) relay.
    2. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Stop Light Control (BRK) Relay
      GTY293392Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 4 Voltage is applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω
      TEXT IN ILLUSTRATION

      *1 Stop Light Control (BRK) Relay