Cruise Control Main Switch: Inspection: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- for vehicles without vehicle-to-vehicle distance control mode:
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
TEXT IN ILLUSTRATION*1 Component without harness connected:
(Cruise Control Main Switch)*2 Main Switch *3 Lever *4 ON/OFF *5 - SET *6 + RES *7 CANCEL - - Standard Resistance
Tester Connection Switch Condition Specified Condition 1 (ECC) - 3 (CCS) Main Switch off*1 1 MΩ or higher Main Switch on Below 2.5 Ω + RES 235 to 245 Ω - SET 617 to 643 Ω CANCEL 1509 to 1571 Ω *1: Lever is in neutral position
If the result is not as specified, replace the cruise control main switch.
- Measure the resistance according to the value(s) in the table below.
- for vehicles without vehicle-to-vehicle distance control mode: