Fail-Safe Chart
HINT:
If the following conditions are detected while the cruise control is in operation, the system clears the stored vehicle speed in the ECM and cancels the cruise control operation.
| Vehicle Condition | Auto Cancel Condition | Re-operation Condition |
|---|---|---|
| CRUISE main indicator light blinks |
|
Turn cruise control main switch on again |
| CRUISE main indicator light blinks |
|
|
| CRUISE main indicator light goes off | There is a problem with the throttle position sensor and motor (throttle with motor body assembly) | Turn cruise control main switch on again |
| CRUISE main indicator light remains on | Under the following conditions, the stored vehicle speed is maintained:
|
Push cruise control main switch to + RES |
| Vehicle speed is lower than the stored speed by approximately 16 km/h (10 mph) or more | Push cruise control main switch to - SET |