On-Vehicle Inspection
- INSPECT ACCELERATOR PEDAL ROD
- Check the voltage.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Start the engine and warm it up.
- Enter the following menu items: Powertrain / Engine and ECT / Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.
- Read the value displayed on the Techstream.
Standard Voltage
Accelerator Pedal Operation Accel Sensor Out No. 1 Accel Sensor Out No. 2 Released 0.5 to 1.1 V 1.2 to 2.0 V Depressed 2.5 to 4.5 V 3.4 to 5.0 V If the result is not as specified, check the accelerator pedal rod, wire harness and ECM.
- Check the voltage.