LEMON Manuals: Even more car manuals for everyone

Terminals Of Ecu

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK OCCUPANT CLASSIFICATION ECU 
    1. Measure the voltage of the connector.
      Fig 1: Identifying Occupant Classification ECU Connectors Terminals
      G05189595Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      OCCUPANT CLASSIFICATION ECU CONNECTORS TERMINALS WITH SPECIFIED CONDITION

      Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
      +B (O4-1) - GND (O4-3) L - W-B +B power source Always 10 to 14 V
      DIA (O4-2) - GND (O4-3) W - W-B Diagnosis (DLC3) Power switch ON (IG) Pulse generation
      GND (O4-3) - Body ground W-B - Body ground Ground Always Below 1 V
      FSR- (O4-4) - GND (O4-3) Y-B - W-B Center airbag sensor communication line Always Below 1 V
      BGND (O4-5) - GND (O4-3) R - W-B Passenger side buckle switch ground line Always Below 1V
      IG (O4-7) - GND (O4-3) B - W-B IG power source Power switch ON (IG) 10 to 14 V
      FSR+ (O4-8) - FSR- (O4-4) Y - Y-B Center airbag sensor communication line Power switch ON (IG) Pulse generation
      BSW (O4-9) - BGND (O4-5) G - R Passenger side buckle switch line Buckle switch ON
      Buckle switch OFF
      Pulse generation
      SGD1 (O5-1) - GND (O4-3) G - W-B Front occupant classification sensor LH ground line Always Below 1 V
      SGD2 (O5-2) - GND (O4-3) O - W-B Front occupant classification sensor RH ground line Always Below 1 V
      SGD3 (O5-3) - GND (O4-3) W - W-B Rear occupant classification sensor LH ground line Always Below 1 V
      SGD4 (O5-4) - GND (O4-3) BR - W-B Rear occupant classification sensor RH ground line Always Below 1 V
      SVC1 (O5-11) -SGD1 (O5-1) R - G Front occupant classification sensor LH power supply line Power switch ON (IG), a load is applied to front occupant classification sensor LH 4.5 to 5.1 V
      SVC2 (O5-12) - SGD2 (O5-2) W - O Front occupant classification sensor RH power supply line Power switch ON (IG), a load is applied to front occupant classification sensor RH 4.5 to 5.1 V
      SVC3 (O5-5) - SGD3 (O5-3) GR - W Rear occupant classification sensor LH power supply line Power switch ON (IG), a load is applied to rear occupant classification sensor LH 4.5 to 5.1 V
      SVC4 (O5-6) - SGD4 (O5-4) V - BR Rear occupant classification sensor RH power supply line Power switch ON (IG), a load is applied to rear occupant classification sensor RH 4.5 to 5.1V
      SIG1 (O5-7) - SGD1 (O5-1) SB - G Front occupant classification sensor LH signal line Power switch ON (IG), a load is applied to front occupant classification sensor LH 0.2 to 4.7 V
      SIG2 (O5-8) - SGD2 (O5-2) L - O Front occupant classification sensor RH signal line Power switch ON (IG), a load is applied to front occupant classification sensor RH 0.2 to 4.7 V
      SIG3 (O5-9) - SGD3 (O5-3) Y-W Rear occupant classification sensor LH signal line Power switch ON (IG), a load is applied to rear occupant classification sensor LH 0.2 to 4.7 V
      SIG4 (O5-10) - SGD4 (O5-4) R - BR Rear occupant classification sensor RH signal line Power switch ON (IG), a load is applied to rear occupant classification sensor RH 0.2 to 4.7 V