LEMON Manuals: Even more car manuals for everyone

On-Vehicle Inspection

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT HEADLIGHT RELAY (Marking: H-LP) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION - SPECIFIED CONDITION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1Ω
      (when battery voltage is applied to terminals 1 and 2)
      Fig 1: Inspecting Headlight Relay (Marking: H-LP)
      G04475911Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the relay.

  2. INSPECT NO. 2 HEADLIGHT RELAY (Marking: DIM) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION - SPECIFIED CONDITION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 4 Below 1Ω
      3 - 5 Below 1Ω
      (when battery voltage is applied to terminals 1 and 2)
      3 - 4 Below 1Ω
      (when battery voltage is applied to terminals 1 and 2)
      Fig 2: Inspecting Number 2 Headlight Relay (Marking: DIM)
      G04475912Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the relay.