LEMON Manuals: Even more car manuals for everyone

Back Door Courtesy Switch: Inspection

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION - SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1 - 2 Back door is closed 10 kΩ or higher
      1 - 2 Back door is opened Below 1Ω

      If the result is not as specified, replace the back door lock assembly.

      Fig 1: Identifying Back Door Lock Assembly (Back Door Courtesy Switch) Connector Terminals
      G04475901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002