LEMON Manuals: Even more car manuals for everyone

Auxiliary Emission Control Systems: Canister: Installation

  1. INSTALL CANISTER 
    1. Install the canister with the 3 bolts.

      Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf) 

      Fig 1: Locating Canister Assembly Bolts
      G04829131Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the vent line hose to the canister.
    3. Connect the air inlet line hose to the leak detection pump.
    4. Connect the purge line hose.
      Fig 2: Locating Vent Line Hose
      G04829142Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Connect the connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    Fig 3: Locating Connector
    G04829143Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002