LEMON Manuals: Even more car manuals for everyone

On-Vehicle Inspection

  1. INSPECT STARTER RELAY ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        STARTER RELAY ASSEMBLY

        Tester Connection Specified Condition
        3-5 Below 1 ohm (when battery voltage applied to terminals 1 and 2)
        10 k ohms or higher

        If the result is not as specified, replace the relay.

        Fig 1: Measuring Resistance Between Starter Relay Terminals
        G04829431Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002