LEMON Manuals: Even more car manuals for everyone

On-Vehicle Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Check the operation.
      1. Turn the ignition switch to ON.
      2. Turn the Techstream ON.
      3. Start the engine and warm it up.
      4. Enter the following menus:

        Select: Power train/Engine and ECT/Active Test/Control the VVT System (Bank 1) VVT.

      5. Operate the OCV using the Techstream, then check the engine speed.

        Standard 

        CAMSHAFT TIMING OIL CONTROL VALVE OPERATION CHART

        Tester Operation Specified Condition
        OCV OFF Normal engine speed
        OCV ON Rough idling or engine stalls

        If the operation is not as specified, check the camshaft timing oil control valve, wire harness and ECM.