Inspection Procedure
HINT:
- After the inspection is completed, clear the DTCs.
- These codes may be output even if there is no malfunction.
- If these codes are output frequently, replace the radio receiver assembly (See REMOVAL ).
- CLEAR DTC
- Clear the DTCs (See DTC CHECK/CLEAR ).
- RECHECK FOR DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE RADIO RECEIVER ASSEMBLY (See REMOVAL )
OK: END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)
- Recheck for DTCs and check if the same trouble occurs again.