Inspection Procedure
- CHECK CD
- Check the CD.
OK: The CD is clean.
HINT:
If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTE: Do not use a conventional record cleaner or antistatic preservative.NG: CLEAN CD
OK: Go to next step.
- Check the CD.
- CHECK CD
- Check that the CD is not deformed or cracked.
OK: No deformation or cracks on the CD.
NG: CHANGE DISC
OK: Go to next step.
- Check that the CD is not deformed or cracked.
- CHECK OPERATION USING ANOTHER CD
- Check if the problem recurs using a normally functioning CD.
OK: The problem does not occur.
NG: Go to step 4
OK: END
- Check if the problem recurs using a normally functioning CD.
- CHECK RADIO RECEIVER ASSEMBLY
- Check the radio receiver assembly is properly installed.
OK: Radio receiver assembly is properly installed.
NG: REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY
OK: REPLACE RADIO RECEIVER ASSEMBLY (See REMOVAL )
- Check the radio receiver assembly is properly installed.