LEMON Manuals: Even more car manuals for everyone

Check Mode Procedure

  1. CHECK MODE (SIGNAL CHECK): DTC CHECK 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Select the SIGNAL CHECK, and proceed to check with the Techstream.
      NOTE: Select the SIGNAL CHECK from the DTC CHECK screen displayed on the Techstream to clear the output DTCs (both present and past).

      HINT:

      • DTCs can be detected more sensitively in check mode than in normal diagnosis mode.
      • Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through the normal diagnosis mode inspection.