LEMON Manuals: Even more car manuals for everyone

Fuel Tank: Installation

  1. INSTALL FUEL TANK CUSHION 
    1. Install new fuel tank cushions onto the fuel tank.
    Fig 1: Identifying Fuel Tank Cushions Onto Fuel Tank
    G06009808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FUEL TANK VENT HOSE 
    1. Install the fuel tank vent hose onto the fuel tank clamp.
    Fig 2: Locating Fuel Tank Vent Hose Clamp
    G05193300Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. Install the fuel tank main tube onto the fuel tank.
      Fig 3: Locating Fuel Tank Main Tube
      G05193299Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL FUEL TANK ASSEMBLY 
    1. Set the fuel tank on a transmission jack.
      Fig 4: Holding Fuel Tank With Transmission Jack
      G06009804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Operate the transmission jack, then install the fuel tank into the vehicle.
    3. Install the 2 No. 1 fuel tank bands with the 4 bolts.

      Torque: 39 N*m (400 kgf*cm, 29 ft.*lbf) 

  5. INSTALL FUEL TANK FILLER PIPE SUB-ASSEMBLY 
    1. Connect the fuel tank filler pipe to the fuel tank.
      NOTE: Make sure that the hose clamp is facing in the correct direction when installing.
      Fig 5: Tightening Hose Clamp Angle
      G05193306Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the claw, then install the fuel tank filler pipe cover onto the fuel tank filler pipe.
    Fig 6: Identifying Fuel Tank Filler Pipe Cover Claw
    G06009938Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY 
    1. Connect the fuel tank main tube.
      1. Align the fuel tube connector with the pipe, then push the fuel tube connector in until it comes into contact with the seat to connect the fuel tank main tube to the pipe, then push the retainer up until the claws lock.
      NOTE:
      • Check that there are no scratches or foreign objects around the connecting surfaces of the fuel tube connector and pipe before performing this work.
      • After connecting the fuel tank main tube, check that the fuel tank main tube is securely connected by pulling on the fuel tube connector and pipe.
      Fig 7: Connecting Fuel Tank Main Tube
      G06009951Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. CONNECT BREATHER TUBE FUEL HOSE 
    1. Connect the breather tube fuel hose to the clamp.
      Fig 8: Locating Fuel Breather Tube Fuel Hose
      G06009800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the breather tube fuel hose to the pipe.
      1. Align the fuel hose connector with the pipe, then push the fuel hose connector in until the retainer makes a "click" sound to connect the fuel tank breather tube fuel hose to the pipe.
      NOTE:
      • Check that there are no scratches or foreign objects around the connecting surfaces of the fuel tube connector and pipe before performing this work.
      • After connecting the fuel tank breather tube, check that the fuel pump tube is securely connected by pulling on the fuel tube connector and pipe.
      Fig 9: Pushing Fuel Hose Connector
      G06009818Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. CONNECT FUEL TANK VENT HOSE 
    1. Connect the fuel tank vent hose.
      1. Align the fuel tube connector with the pipe, then push the fuel tube connector in until it comes into contact with the seat to connect the fuel tank vent hose to the pipe.
      2. Slide the retainer of the fuel tube connector to lock the claws as shown in the illustration.
      NOTE:
      • Check that there are no scratches or foreign objects around the connecting surfaces of the fuel tube connector and pipe before performing this work.
      • After connecting the fuel tank vent hose, check that the fuel tank vent hose is securely connected by pulling on the fuel tube connector.
      Fig 10: Connecting Fuel Tube Connector
      G06009717Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL NO. 1 FUEL TANK PROTECTOR 
    1. Install the fuel tank protector sub-assembly with the 4 bolts.

    Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    Fig 11: Identifying No. 1 Fuel Tank Protector With Bolts
    G06009797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. CONNECT PARKING BRAKE CABLE 
    1. Install the parking cables with the 4 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 12: Locating Parking Brake Cable With Bolts
      G06009796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. INSTALL FRONT EXHAUST PIPE ASSEMBLY 

    See INSTALLATION

  12. ADD FUEL 
  13. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 
    1. Install the fuel suction tube assembly with pump and gauge (See INSTALLATION ).
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL  (See INSTALLATION )
  15. INSPECT FOR FUEL LEAK  (See ON-VEHICLE INSPECTION )
  16. INSPECT FOR EXHAUST GAS LEAK